Rubber cutting machine
Product introduction:
Vertical rubber cutting machine
It is mainly composed of rubber cutting knife, frame, working cylinder, base auxiliary workbench, hydraulic system, electrical system and other parts. The base under the glue cutter is equipped with a nylon pad to protect the blade of the glue cutter. When cutting raw rubber, place the rubber material under the cutter, and then press the start button. The rubber cutting knife will be driven by the piston rod and fall along the slide on the frame to cut the rubber material. The frame is equipped with two upper and lower limit switches to control the reversing valve to change the movement direction of the cutter.
Performance characteristics:
The vertical glue cutting machine has a simple structure and reasonable design. Easy to operate.
This machine is a single-knife hydraulic machine. The vertical hydraulic glue cutting machine is mainly composed of a cutter, a frame, a hydraulic system and an electrical system.
Large pieces of raw rubber can be cut into small pieces for processing, reducing the huge resistance brought to the equipment by the plasticizing of large pieces of raw rubber. The plasticizing speed is fast, saving time, electricity and labor, and extending the life of the rubber mixing equipment. life and improve rubber mixing efficiency. Vertical hydraulic rubber cutting machine is suitable for cutting natural rubber, synthetic rubber and various plastic materials, plastic woven bags, and film rolls.
This machine is mainly suitable for cutting natural rubber, synthetic rubber and other plastic materials. It is especially suitable for installation next to the internal mixer. This machine for cutting small pieces of rubber mainly includes a rubber cutting knife, a frame, a working cylinder, It consists of a base, an auxiliary workbench, a hydraulic system, an electrical system and other parts. The base under the rubber cutting knife is equipped with a nylon pad to protect the blade of the rubber cutting knife. When cutting raw rubber, manually place the rubber material under the rubber cutting knife, and then press the start button. The rubber cutting knife will be driven by the piston rod and fall along the slide on the frame to cut the rubber material. The frame is equipped with two upper and lower limit switches to control the reversing valve to change the movement direction of the rubber cutting knife. At the same time, it can also protect the piston cylinder head.
Hydraulic glue cutting machine parameters:
<> Product model
<>
<>
<>
<>
<>
<> Rated pressure
<>
<>
<>
<>
<>
<> Motor power
<>
<>
<>
<>
<>
<> Cutter width
<>
<>
< >
<>
<>
<> Work schedule
<>
<>
<>
<>
< >
<> Working oil pressure
<>
<>
<>
<>
<>
<> Overall dimensions
/> <>
<>
<>
<>
<>
<> Weight
<>
<>
<>
<>
<>
Glue cutting machine